Our Authorised Dealers

DASMESH - Water Meters

Introduction


DASMESH  WATER METERS are manufactured in au sizes, both Domestic and Bulk type in technical collaboration with the world-renowned companies for last four decades. These are designed for durability, accuracy of registration and trouble free service for a number of years. The factory is equipped with most modern machines and equipments. Meters are manufactured under the skilled supervision of expert foreign trained engineers. The rigid quality control during the various stages of manufacture in the factory allows only a top class product entering the market.


All meters conform to 152373 and ISO 4064/1

Magnet Type

 

 

Domestic Type

 
   

 

Specifications For Water Meters (Domestic Type) is: 779/ 1978

IS :779

 

TYPE-A

Size of The Meter

15 MM

20 MM

25 MM

40 MM

50 MM

Maximum recording capacity in Kilo Litres 9999 9999 9999 99999 99999
Maximum Flow Rate in Qmax - Lts./Hr. 3000 5000 7000 20000 30000
Nominal Flow Rate Qn - Lts./Hr. 1500 2500 3500 10000 15000
Permissible loading Litres per day (8 hours) 24,000 40,000 56,000 1,60,000 2,40,000
 

Enclosed Type

 

Interchangeable Type

 
Specifications For Water Meters is: 2373-1981

IS :779

 
Dasmesh-Spiral Water Meters (Bulk Type) Enclosed And  Interchangeable Type Full Flow

Size of The Meter

50 MM

80 MM

100 MM

150 MM

200 MM

250 MM

300 MM

350 MM

400 MM

500 MM

600 MM

 

million

million

million

million

million

million

million

million

million

million

million

Maximum recording capacity in Litres 

100

100

1000

1000

1000

1000

1000

10,000 10,000 10,000 10,000
Minimum reading quantity in Litres 10 10 100 100 100 100 100 1000 1000 1000 1000
Out side diameter of flanges 165 200 220 285 340 395 445 505 565 670 780
Meter discharge Litres per our at 1m loss of head 20,000 62,000 100000 250000 400000 550000 750000 1000000 1500000 2500000 3500000
Minimum starting flow Litres  per hour 500 1000 1500 3500 5500 9000 14000 20000 25000 35000 45000
Permissible loading Litres per day (8 hours) 200000 620000 1000000 2500000 4000000 5500000 7500000 10000000 15000000 25000000 35000000
 
 

Coating Thickness Gauges

Digital Coatmeter

 

Coatmeasure

M1

C

Range / Resolution

Microns

(0 -20)/0.1

(20 -1250)/1

Accuracy Microns

2 or 1.5%

 
Min Base Thickness

0.3 mm

 
Min Area Circle of dia.

10 mm

 
Min Radius Sphere Convex 6 mm 10 mm
Concave 15 mm 22 mm
Min Dia. Cylinder Outside 6 mm 8 mm
Inside 15 mm 20 mm
Supply Dry Battery 6f22 9V  
Working Temp. Deg C 0 - 50  
Size Instru. mm 130x86x50  
Probe mm D12x1.30 D18xL45
Weight  g 300  

Dial Type Coatgauge
Operating Priciple

When a magnetic base is brought near to 'U magent the leakage magnetic flux gets changed. This change is measured by the deflection of a magnetic needle placed in the flux area. The deflection on needle is calibrated to indicate the air gap (non-magnetic coating) between U magnet & magnetic base.

 

Easy to Operate
After presetting the instrument place it on the job, press a button and you get the reading.
In a short time number of jobs can be checked.

   
Sales Available

 
Pencil Type Coatgauge

 

Pull off Type ( For Vertical use only)

 

Scale 'mu' reads in microns, 'th' in thou and 'ep' is

equally divided.:

Pencil Type Coatest

 

Pull off Type with Cursor.

(For vertical use only)

 
   

SHUBHNORG

 
 

   
  • Y' Type Valves
  • Dust Collecting Valves
  • Actuator Operated Ball Valves
  • Air Cylinder Operated Control Valves
  • Piston Operated Diaphragm Valves
  • Sol. Operated Steam Valves
  • Diaphragm Valves
 

3/8" to 2" BSP

3/8" to 2" BSP

1" to 4" BSP

 
 

3/4" to 1 1/2" BSP

1/2" to 2" BSP

50mm to 200mm BORE