Our Products

 

Temperature : PID Temperature Controllers, Digital On-Off / Proportional Controllers
Time : Din Rail Mounting Timers, Panel Mounting Timers
    Digital Timers, Time Totalisers and Time Interval Meters
Count : Rate Meters, Totalisers, Batch Controllers
PLC's : With in-built MMI (Panel Mounted)
Process : Indicators and Controllers
     
BOURDON TYPE PRESSURE VACUUM & COMPOUND GAUGE
SPECIFICATIONS
 
Dial Size : 50, 63, 75, 100, 150, 200, 250 and 300 mm.
Range  :

0-1 Kg/cm2 to 0-700 kg/cm2 -76 cm to 0 Hg. Vac.

and -76 cm Hg. Vac. to 28 Kg/cm2 and its equivalent ranges in psi.

Accuracy : 1%FSD. 2%FSD.
Bourdon : Brass or Stainless Steel 304 and 316
Conn. Material : Extruded Brass or Stainless Steel 304 and 316.
Movement : Non-ferrous or Stainless Steel.
Case : Stainless, steel Cast Aluminium water proof, stoved enamelled black, & Pressed Steel.
Connection : 1/2", 3/8", 1/4", 1/8' BSP or as desired.
Mouniiting : Surface, direct or flush panel.
     
     

DIAPHRAGM AND CAPSULE TYPE LOW PRESSURE GAUGE
SPECIFICATIONS
     
Dial Size : 63, 100, 150, 200, 250 mm circular and concentric.
Range Capsule : Mini. 0-100 mm of water to max. 10000 mm of water and its
equivalent vacuum compound or mbar.
Range Diaphragm : o to 1 kg/cm2  to + 25kg/cm2 - 1 to 0kg/cm2  Vac.
Accuracy : 1.5 of Full Span.
Capsule/Diaphragm : Brass/Steel or Stainless Steel 304 or 316.
Bottom Chamber : Cast Iron/Steel or Stainless Steel.
Movement : Non-ferrous / Stainless Steel.
Case & Bezel : Cast Iron stove enamelled black, Cast Aluminium weatherproof, Stainless Steel.
Connection : Steel, Brass or Stainless Steel 3/8" BSP, 1/2" BSP or as per requirement
Mouniiting : Bottom entry or Back entry.
     
     

 

HOMOGENIZER PRESSURE GAUGE

Diaphragm Type

DIFFERENTIAL PRESSURE GAUGE

Single Diaphragm

 

 

Range (in kg/cm2or bar)

0 to 250

 

Range

0 to 2kg/cm2

 
       
EDGE WISE DRAFT GAUGE

ALL SS PRESSURE GAUGE

Electric Contact Type (High Case Version)

   

Range

0 to 100 mmWC

 

Range

0 to 10kg/cm2

 
     
MERCURY-IN-STEEL & VAPOUR PRESSURE DIAL THERMOMETER
SPECIFICATIONS
     
Type : Rigid stem or Distance type
Dial Size : 100, 150, 200 and 300 mm.
Range : -38C + 650C (Mercury) 0C to + 300C (Vapour).
Accuracy : 1% (Mercury) 1.5% (Vapour), of FSDspan.
Bulb & Stem : Brass, Steel or Stainless Steel 304 or 316.
Capillary : Steel / Copper.
Capillary Armour : Copper, Stainless Steel or Sfeelspring covered with PVC.
Movement : Non-ferrous or Stainless Steel
Case & Bezel : Cast Aluminium weatherproof stoved enamelled black Stainless Steel.
Crinnection : 3/4", 1/2" BSP or as desired.
Mounting : Direct or back surface, or flush Panel.
     
 


 

 

INDUSTRIAL THERMOMETER

BIMETAL

 

SPECIAL FEATURES

  • ST.AJNLESS STEEL  ALUMINIUM  /M.S.CASE & STEM

  • BOTTOM / BACK / EVERY ANGLE ENTRY

  • OP11ONAL: SILICON FILLED UPTO 200C

  • STANDARD FOLLOWED EN 13190.

Range avalable from -50 to 600 Deg Cent.

Dial Size 50mm ,63mm ,100mm, 150mm

APPLICA11ONS

  • CHEMICALS/REFINERY/FERTILIZER /

  • PETROCHEMICALS / PHARMACEUTICAL I POWER/

  • CEMENT / SUGAR / FOOD & BEVERAGES / PULP &
    PAPER & ALLIED PROCESS INDUSTRIES.